Tally Genicom T5023+ - Manual (Page 120)

Print modes Standard commands
110 T5023/5023+ - Programming Guide
Switching on bold print
Function:
ESC E switches bold print on. With bold print each dot of a print character is prin-
ted twice. The second dot is printed slightly displaced to the right.
Example:
Result (reduced in size):
ESC
27
1B
E
69
45
ASCII character
Decimal
Hexadecimal
– Bold print is switched off again using ESC F or ESC ! (n).
– Bold print and double impact print can be combined.
– Bold print can be used with draft and LQ print quality.
– The print rate is slower with bold print than with normal print.
BEGIN
PRINTLF("standard print")
PRINT(char(27),"E")
<-- Bold print on
PRINTLF("bold print") LQ print quality
PRINT(char(27),"x",char(1)) <-- (ESC x (n))
PRINTLF("bold print in LQ print quality")
PRINT(char(27),"G") <-- Double impact print on
PRINT("bold print and double impact print") (ESC G)
PRINTLF(" in LQ print quality")
END
i