Tally Genicom T5023+ - Manual (Page 110)

Print quality and character size Standard commands
100 T5023/5023+ - Programming Guide
Selecting the character size 15 cpi
Function:
ESC g sets the character size to 15 cpi (15 characters per inch). Set character
sizes in 10 cpi or 12 cpi are cancelled.
Example:
Result:
ESC
27
1B
g
103
67
ASCII character
Decimal
Hexadecimal
– After switching on or initializing the printer, the character size is set
to the value, which has been set in the emulation menu.
– The character size 15 cpi can be combined with elongated print,
however, not with condensed print.
– With proportional spacing the character size is set to 10 cpi.
BEGIN
PRINT(char(27),"P")
PRINTLF("character size 10 cpi")
PRINT(char(27),"M")
PRINTLF("character size 12 cpi")
PRINT(char(27),"g")
PRINTLF("character size 15 cpi")
END
i