Tally Genicom T5023+ User Manual
Page 53
Standard commands
Controlling the configuration of the printer
T5023/5023+ - Programming Guide
43
All default values of the document printer are listed in the appendix of this ma-
nual. If the printer is initialized via ESC @ at any vertical position on a document,
undesired results can occur during subsequent actions (current vertical position
is new line 1). For this reason ESC @ is not recommended for initializing para-
meters within a document.
When initializing or defining printer parameters for certain applications,
the following cases are to be differentiated:
–
Parameters, which are specified by means of their default value
–
Parameters, which are set by corresponding ESC sequences (do-
cument length, type font, character width, etc.)
–
Parameters, which are reset to their default value by means of the
command ESC @.
i