Tally Genicom T5023+ - Manual (Page 366)

Paper Specifications Appendix
356 T5023/5023+ - Programming Guide
Paper Specifications
The document printer has a document print station which can process single
documents, multi-copy documents (document sets) and passbooks. A magnetic
stripe reader (MSR) can be installed as an option at the document print station.
The document printer is operated with an automatic print head guidance system
for printing passbooks and documents.
For the right-angle orientation of the documents and passbooks towards the
print mechanism the documents/passbooks are aligned a the right-hand side of
the document chute assembly and at the front of the document stop. Transmitted
light barriers are located at these positions. Another transmitted light barrier
located inside the document feeder allows printing with footer detection.
Reference Lines
The safety distances described in this document use the outer document and
passbook edges as well as the staggered edges and folds as reference lines.
The reference lines for the print characters are defined by the represented
character box.
The character box is a rectangle where the width is predefined by the character
pitch selected (e.g. 1/10 inches for 10 characters/inch). The height of the
character box is defined by the vertical distance between the top and bottom
needle (3.5mm for the document printer). Any dot within this character box can
be printed (blackened).