Tally Genicom T5023+ - Manual (Page 193)

Additional commands (Printer) Important notes on document processing
T5023/5023+ - Programming Guide 183
Horizontal print position 0
With the horizontal leading edge on the left, the left edge of the document is iden-
tical to print position 0 for all character spacings unless a left margin was set
using the standard command ESC l (n) (see the next subsection “Position 0 after
ESC l (n)”). If no left margin was set, the left character box limit of the first pos-
sible print character lies on the left edge of the document: