Tally Genicom T5023+ - Manual (Page 75)

Standard commands Sheet ejection commands
T5023/5023+ - Programming Guide 65
Sheet ejection
Function:
After FF all the data still contained in the printing buffer is printed and subse-
quently the current document ejected.
After the ejection the current logical position of the print line (distance between
the upper edge of the document and the base line of the print line) is identical to
the insertion position set via the operating panel (value between 10/ 60 and 80/
60 inch) if print data is transmitted without a previous insertion command. Howe-
ver, a document will not be requested until print jobs are available!
The insertion position can be set in the document printer menu by selecting the
menu item TOF- POS (see the Operating Manual). The default value is 3/ 6
inch.Manual
FF
12
0C
ASCII character
Decimal
Hexadecimal
If a further FF or a series of FFs immediately follow an FF, these will not
be executed.
i