Automatic single sheet feeder on/off – Tally Genicom T5023+ User Manual
Page 60
Advertising
Controlling the configuration of the printer
Standard commands
50
T5023/5023+ - Programming Guide
Automatic single sheet feeder on/off
Since the automatic single sheet feeder is not available for the document printer,
all other parameters (n = R) are ignored except for one.
ASC II
Decimal
Hexadecimal
Function
0
48
30
Switches single sheet feeder off
1
49
31
Selects feeder compartment 1
(only if 2 feeder compartments are
available)
2
50
32
Selects feeder compartment 2
(only if 2 feeder compartments are
available)
4
52
34
Switches single sheet feeder on
R
82
52
Ejects one sheet without pulling in a
new one.
Instead of ESC EM R (= sheet ejection) use the FF (Form Feed) com-
mand to do without the ESC EM command altogether in an application.
i
Advertising
This manual is related to the following products: