Tally Genicom T5023+ - Manual (Page 289)

Loadable Firmware/Character Generators ESCAPE Sequences (Bootstrap
T5023/5023+ - Programming Guide 279
ESCAPE Sequences (Bootstrap Loader)
Switch-over to the Load Function
Function:
This command is used to exit the currently running emulation software. All data
is deleted from the input buffer. The mechanical functions are stopped
immediately.
The load software is started and generates the acknowledgment ESC BEL L
after 500ms min. for synchronization.
Parameters
ESC
27
1B
BEL
7
07
L
76
4C
n
48-55
30-37
ASCII characters
Decimal
Hexadecimal
n = 0 Transfer rate not changed
n = 1 Baud rate 2,400
n = 2 Baud rate 4,800
n = 3 Baud rate 9,600
n = 4 Baud rate 19,200
n = 5 Baud rate 38,400
n = 6 Baud rate 57,600
n = 7 Baud rate 115,200