Tally Genicom T5023+ - Manual (Page 372)

Error messages Appendix
362 T5023/5023+ - Programming Guide
Error Cause / Possible action Service information:
No. / Meaning
WRONG
IF_TYPE The Interface type set in the
parameter menu cannot be ac-
tivated
Set another interface type:
check whether the correct op-
tional interface board is instal-
led; check whether the optional
interface board is correctly in-
serted.
WRONG
ORDER Incorrect control sequence or
character which cannot be
printed
Check the system driver, load
different emulation firmware
into the printer
The printer has loaded
an emulation A, howe-
ver the received data is
for an emulation B
JOURNAL BUFFER
FULL Electronic Journal full
Start a journal printout and de-
lete journal memory
COVER OPEN Printer cover open
Close Printer cover