Notes on the command description – Tally Genicom T5023+ User Manual
Page 188
Advertising
Structure of the additional commands
Additional commands (Printer)
178
T5023/5023+ - Programming Guide
Notes on the command description
In the individual descriptions of the CSI commands the Pi parameters are repre-
sented as follows:
n
: one parameter
n1; n2;n3
n1; ... ; n5
:
parameters (in this case 3)
(0 - 9)
:
Value range of a parameter from 0– 9 or 0– 99 or 0– 999, etc.
Advertising
This manual is related to the following products: