Xantrex Technology SW Plus 4024 - Manual (Page 103)

DC Wiring
976-0043-01-02 3–21
Figure 3-11 shows the proper method to attach the cables to the inverter.
Figure 3-12 shows the battery terminal covers and associated hardware.
Figure 3-11 Battery Cable Connection
CAUTION: Damage to Equipment
Do not put anything between the battery cable lug and the terminal surface.
Overheating of the terminal may occur. Do not apply any type of antioxidant
paste until after the battery cable wiring is tightened. The same applies for all DC
connections.
Copper
Compression
Lug
Battery
Cable Lug
Terminal
Surface
Star
Washer
Figure 3-12 Battery Terminal Covers and Associated Hardware