Menu map, Introduction, The “user” menu – Xantrex Technology SW Plus 4024 User Manual
Page 139: The “basic setup” menu, The “advanced setup” menu, Figure 5-8 menu structure, Menu map –7, Figure 5-8, Menu structure –7
Menu Map
976-0043-01-02
5–7
Menu Map
Introduction
The menu system contains three main menu maps. Each Menu Map is
made up of:
•
Menu Headings,
•
Menu Items, and
•
Set Points.
A set point is selected when the cursor highlights the first letter, or
number, of the selection.
Each of the Menu Headings will have “END Menu” menu items to
indicate the end of the Menu Heading category.
The “User” Menu
•
The User Menu contains the basic operational functions of the unit
and provides system status information. The User Menu uses Menu
Headings 1-7.
The “Basic Setup”
Menu
•
The Basic Setup Menu contains the basic setup information to run the
equipment in basic inverter/charger Mode. Basic programming
includes setting the time-of-day clock, configuring the inverter
functions, determining the battery charging parameters, and selecting
the AC input characteristics. The Basic Setup Menu uses Menu
Headings 10-14 with applicable menu items to support each function.
The “Advanced
Setup” Menu
•
The Advanced Setup Menu contains the setup information for the
system to use to perform special (or advanced) features such as
automatic generator starting, auxiliary load control, remote
monitoring, and energy management features. The Advanced Setup
Menu uses Menu Headings 20-27.
Figure 5-8 Menu Structure