Connect the ground (green or bare) wire, A) from the inverter ac ground bar, B) to the inverter panel ground bar – Xantrex Technology SW Plus 4024 User Manual
Page 116: Connect the neutral (white) wire, A) from the inverter neutral out terminal, B) to the inverter panel neutral bus, Connect the hot (black) wire, A) from the inverter ac out terminal, Figure 3-19, Ac output wiring to the inverter ac panel –34
Advertising
Installation
3–34
976-0043-01-02
Make connections from the inverter to the inverter panel as follows:
1.
Connect the GROUND (green or bare) wire:
a) from the inverter AC GROUND bar
b) to the inverter panel GROUND bar
2.
Connect the NEUTRAL (white) wire:
a) from the inverter NEUTRAL OUT terminal
b) to the inverter panel NEUTRAL bus
3.
Connect the HOT (black) wire:
a) from the inverter AC OUT terminal
b) to the inverter panel main input circuit breaker
4.
Torque all inverter terminal block connections to 25 inch-pounds.
Figure 3-19 AC Output Wiring to the Inverter AC Panel
Advertising
This manual is related to the following products: