Xantrex Technology SW Plus 4024 - Manual (Page 276)

Configuration Settings
B–2 976-0043-01-02
User Menu Settings
Table B-1 provides a list of User Menu headings and menu items, with
available set points. This table also provides the default settings for each
menu item as programmed in the factory. The last column “User Settings”
is provided for you to write in the settings specific to your installation.
Table B-1 User Menu Default and User Settings
User Menus
Sine Wave Plus
2524 and 4024
Sine Wave Plus
2548, 4048, and 5548
User
Settings
Range/
Display
Default
Settings
Range/
Display
Default
Settings
01 Inverter ON/OFF Menu See “01 Inverter ON/OFF Menu” on page 8–15 for details.
01A Inverter OFF SRCH
ON CHR OFF OFF SRCH
ON CHR OFF
01B EQ Charge OFF ON OFF OFF ON OFF
01C Search Watts (SRCH) 00 to 248 08 00 to 248 08
01D Bypass Mode AC1 NORM
AC2 NORM AC1 NORM
AC2 NORM
02 Generator ON/OFF Menu See “02 Generator ON/OFF Menu” on page 8–17 for details.
02A Generator OFF AUTO
ON OFF OFF AUTO
ON OFF
02B Gen Start Load Amps YES NO Read Only YES NO Read Only
02C Gen Start Volts/Manual YES NO Read Only YES NO Read Only
02D Gen Start Exercise Run YES NO Read Only YES NO Read Only
02E Gen Start Run Time YES NO Read Only YES NO Read Only
02F Days left to Gen Exercise 00 to 255 Read Only 00 to 255 Read Only
03 Time of Day (00:00:00) See “03 Time Of Day Menu” on page 8–20 for details.
SWPlus
Revision 2.01 Info.
Displayed Read Only Info.
Displayed Read Only
2.5 KVA ** 120 VAC 60 HZ **24 Vdc Read Only **48 VDC Read Only
Xantrex Tech Inc
5916 195th St NE Info.
Displayed Read Only Info.
Displayed Read Only
Arlington, WA
98223 USA