Xantrex Technology SW Plus 4024 - Manual (Page 242)

Operation
8–24 976-0043-01-02
04G Grid (AC1) Volts AC
This menu item displays the AC input voltage connected to the inverter's
AC1 terminals. This input voltage display may drift slightly before the
inverter has synchronized to the grid.
04H Gen (AC2) Volts AC
This menu item displays the AC input voltage connected to the inverter's
AC2 terminals. This input voltage display may drift slightly before the
inverter has synchronized to the generator.
04I Frequency Hertz
This menu item displays the frequency of the active AC source (inverter,
grid or generator). This value may drift slightly until the inverter fully
synchronizes to an external AC source. Once synchronized, the inverter
follows the frequency of the AC source.
04J Max Bulk/EQ Time h:m
This menu item display shows the time the system has been charging the
batteries in either bulk, absorption, or equalize mode.
04K Battery Temp Degrees C
This menu item display shows actual battery temperature as measured by
the BTS. Use this menu item to monitor or check the temperature of the
batteries.
If the BTS is not installed, this display will show “OL”.
04L Fan Speed
The inverter/charger contains two internal cooling fans. The speed of the
fans is determined by the internal temperature of the unit and is controlled
automatically.
This menu item displays the current fan speed by displaying the number
00, 01, 02, 03, or 04. The slowest speed is 1 and the fastest speed is 4.
“00” indicates the fan is off or not running.
04G Grid (AC1)
Volts AC
04H Gen (AC2)
Volts AC
04I Frequency
Hertz
04J Max Bulk/EQ
Time h:m
04K Battery Temp
Degrees C
04L Fan Speed