Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 107)

108
You can erase a CF card in PLEXTALK or in a PC if you have a suitable card
reader.
Caution: Whenever you erase a CF card using a PC, make sure you select
"FAT-16" or “FAT-32”.
16.3. Inserting a blank CD or CF card.
In order to start any recording, you will need to insert a suitable CD or CF
card into PLEXTALK. In Section 6.9, you saw how to insert and eject CDs
and CF cards in general terms. This section details how PLEXTALK behaves
when a blank CD or CF card is inserted ready for recording.
Assuming that no disc or CF card is in PLEXTALK, and that there is no
external source connected to the microphone or line in sockets, PLEXTALK
will behave in the ways detailed below.
16.3.1. Inserting blank data CDs.
CAUTION: PLEXTALK is only compatible with round CDs. Irregularly
shaped CDs, such as the business card type, will cause a malfunction and
should not be used.
CAUTION: As the CD rotates at a high speed, do not stick any thick items,
like Braille labels, onto the surface of the disc.
When you insert a blank data CD-R or CD-RW disc, the following happens:
• PLEXTALK will say "Blank disc. Title does not exist. Press Record key
to create DAISY title". This indicates that PLEXTALK will only permit
the recording of a DAISY title on a data CD.
• Now press the Record key.
• PLEXTALK will say "Creating DAISY title" and will then proceed to
create the DAISY title on the CD. This may take a few seconds.
• When complete, PLEXTALK will say "Finished. Push Record key,
record to disc. Level monitor auto". PLEXTALK will then say "Auto"
repeatedly.