Start and stop playback, Changing the playback volume – Activeforever Plextalk PTR2 Digital DAISY Player and Recorder User Manual

Page 64

Advertising
background image

65

This is a particularly useful feature if you need to swap CDs or CF cards and

then want to return to the first one, for example, if you are studying and

need to refer to a variety of books.

11.2. Start and stop playback.

To start or stop playback, do the following:

REMINDER: The Play/Stop key is the blue trapezoidal shaped key with the
recessed surface, located in the centre of the front edge of PLEXTALK. It is

immediately behind the narrow dip in the middle of the front edge.

• To start playback, press the Play/Stop key. PLEXTALK will start

playback from the position where it was stopped previously.

• To stop playback, press the Play/Stop key.

NOTE: If a book or album has played all the way to the end, it will stop

automatically unless a playback mode which overrides this action has

been selected. Pressing the Play/Stop key when the book or album has

played to the end, will cause the book or album to commence playback
from the beginning again.

11.3. Changing the playback volume.

REMINDER: The Volume Up and Volume Down keys are one behind the
other in the middle of the right hand side of the top of PLEXTALK.

Combined, they are shaped like a rectangle with a curved top and bottom

edge. They are blue in colour. The Volume Up key is nearer to the rear of

PLEXTALK and the Volume Down key is nearer to the front. Although

close together, there is a distinct gap between the 2 individual keys.

The volume can be set on a scale from 0 to 20, in steps of 1, with 0 being

silent and 20 being the loudest possible setting.

To increase the playback volume, either press the Volume Up key
repeatedly, increasing the level by 1 setting for each press of the key, or

press and hold the Volume Up key until the volume reaches the desired

level.

Advertising