Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 61)

62
• The date and time should now be set correctly and PLEXTALK will
automatically exit this feature. By way of confirmation, the date
and time that you have just entered will then be spoken back to
you.
10.2. Selecting the 12 or 24 hour mode for the internal
clock.
The PTR2 gives you the option of using the 12 or 24 hour clock method of
announcing times. To select the way that you wish to have times
announced, do the following:
• Press the Menu key once to access the Main Menu.
• Use the Number 4 or 6 key to go to the "Control panel" option and
select it by pressing the Enter key.
• Use the Number 4 or 6 key to go to the "Switch over the 12 or 24
hour setting" option and select it by pressing the Enter key.
• Use the Number 4 or 6 key to go to either the "12 hour" or the "24
hour" setting according to your preference and press Enter to
confirm your choice.
• Your preferred option will be set and PLEXTALK will automatically
exit from the menu system.
NOTE: The 12 hour setting is the factory default setting.
10.3. Selecting a preferred waiting sound.
When PLEXTALK is busy, such as when it is accessing or erasing a CD-RW
disc, it plays a sound to indicate that it is carrying out that action. The
PTR2 gives you 3 options of waiting sounds to choose from which are
"Waiting sound 1", "Waiting sound 2" and "No waiting sound"..
To select your preferred waiting sound, do the following:
• Press the Menu key once to access the Main Menu.
• Use the Number 4 or 6 key to go to the "Control panel" option and
select it by pressing the Enter key.