Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 40)

41
• If an Audio File CD is inserted, PLEXTALK will say "Audio File CD"
followed by "Current album XX, total album YY" (where XX is the
number of the current album and YY is the total number of albums
on that CD).
• If any blank CD-R or CD-RW is inserted, PLEXTALK will speak an
appropriate message relating to that type of blank disc. Further
details will be given later about the specifics of these messages.
NOTE: If only one title is on a DAISY CD or only 1 album is on an Audio File
CD, no title or album announcement will be heard.
NOTE: If you accidentally insert a CD upside down, PLEXTALK will attempt
to access it for a while and then will say "Improper or damaged disc". You
should then eject the CD and ensure that it is inserted the correct way up.
NOTE: If PLEXTALK is set to a playing mode other than Standard mode,
the current setting of the playing mode will be announced after the type
of CD announcement. Further information about playing modes is given
in later chapters of this guide.
To eject a CD, do the following:
REMINDER: The CD eject key is the blue, square key at the front right
corner of the top of PLEXTALK.
• Press and release the Eject key.
• PLEXTALK will say "Eject" followed by musical tones to indicate that
the unit is busy.
• After a short pause, the CD will be ejected and PLEXTALK will say
"No disc".
• You can now pull the CD the rest of the way out of the slot.
6.9. Inserting and ejecting a CF card.
REMINDER: PLEXTALK is able to use both “CF Type I” (Compact Flash) and
“CF Type II” (Micro drive) cards. In this User’s Guide, both compact flash
cards and micro drives are called “CF cards”.
REMINDER: The card slot is located on the front face, towards the left of
PLEXTALK, immediately underneath the CD slot.
REMINDER: The CF card, which is included as an accessory, has already
been inserted in the CF card slot.