Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 141)

142
• "No additional recording and editing" - You cannot add any
additional recording after finalisation.
• "Additional recording and editing enabled" - You can add
additional recording to your CD by first performing the "Prepare to
edit" command.
To perform the finalisation process, do the following:
Press the Menu key once to access the Main Menu.
Use the Number 4 or 6 key to go to the "Media Management" option and
select it by pressing the Enter key.
Use the Number 4 or 6 key to go to the "Finalise CD" option and select it
by pressing the Enter key.
If you do not have PLEXTALK connected to mains power at this time,
PLEXTALK will speak a warning and ask you to confirm that you wish to
proceed. If you are connected to the mains source, this warning will not
be heard.
If you wish to continue, press the Enter key or press the Cancel key to
abort the process.
If you choose to continue, use the Number 4 or 6 key to go to either " No
additional recording and editing " or " Additional recording and editing
enabled ", according to your preference, and select it by pressing the Enter
key.
PLEXTALK will ask you to confirm that you wish to continue. Press the
Enter key to start CD finalisation or the Cancel key to abort the process.
You can check the progress of the finalisation process by pressing any key
on PLEXTALK, at any time.
After a while CD finalisation will be complete and PLEXTALK will say
"Finished".
CAUTION: If the battery runs down during CD finalisation, you may end
up with a CD that is not playable. It is strongly recommended that you
connect to a mains power source before performing CD finalisation.
NOTE: The finalisation process, for a DAISY title, will require between
30MB and 40MB of disc space, in order to close the session.
NOTE: In the case of a Music CD, you are not given these 2 options as you
cannot add any additional recording after finalising the CD.