Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 27)

28
have found the bottom of the unit, place the unit carefully down, on the
four rubber feet, on a flat surface in front of you.
Locate the perforated surface of the speaker grill on the top of PLEXTALK.
Keep the feet downwards and rotate it until the speaker grill is furthest
away from you. The PTR2 should now be set up in its normal operating
position. You can confirm this by feeling the top edge of the face nearest
to you. There should be a narrow, but noticeable, dip in the middle of this
edge. It is worth taking note of this as it can be used later to help locate
the Play/Stop key and the centre of the CD slot.
Keep the unit in this position as the physical layout is described.
6.3.1. Top surface.
The grill that you used to orientate the unit is where the internal speaker
and the built in microphone are located. The speaker is on the right and
the microphone is to the left.
Just in front of the grill, on the left side, you should find 2 small bumps.
These are LEDs. The one on the left is green and indicates when the unit is
switched on or off. It flashes when the unit is shutting down. The one on