Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 148)

149
To set a track when recording is paused, press the Heading key once.
PLEXTALK will say "Track XX". The track will be inserted when recording
recommences.
Whilst still in recording pause, you can cancel the track by pressing the
Heading key a second time. PLEXTALK will say "Cancel track XX".
CAUTION: When you try to create track that are shorter than 2 seconds
long, a warning alarm will be heard and the track number will be placed in
the recording.
NOTE: Don't forget that the Music Standard recording mode will
automatically insert new tracks if there is silence for more than 2 seconds
in the input sound. If you wish to retain tighter control of the setting of
tracks, you may prefer to use the Music Custom recording mode and set
the tracks manually.
NOTE: In all the above items, "XX" is the number of the track that has been
set or cancelled.
18.7. Finalising a Music CD.
When a CD is finalised, it can be played on a commercially sold CD player.
If you do not finalise a CD after recording it, you will not be able to play it
on players other than PLEXTALK. Once you finalise a Music CD, you
cannot add any further recording. This section details how to run the CD
finalisation process.
To perform the finalisation process, do the following:
• Press the Menu key once to access the Main Menu.
• Use the Number 4 or 6 key to go to the "Media Management"
option and select it by pressing the Enter key.
• Use the Number 4 or 6 key to go to the "Finalise CD" option and
select it by pressing the Enter key.
• If you do not have PLEXTALK connected to mains power at this
time, PLEXTALK will speak a warning and ask you to confirm that
you wish to proceed. If you are connected to the mains source, this
warning will not be heard.
• If you wish to continue, press the Enter key or press the Cancel key
to abort the process.