Changing the guide volume – Activeforever Plextalk PTR2 Digital DAISY Player and Recorder User Manual

Page 65

Advertising
background image

66

To decrease the playback volume, either press the Volume Down key

repeatedly, decreasing the level by 1 setting for each press of the key, or

press and hold the Volume Down key until the volume reaches the desired

level.

When PLEXTALK is not playing, each time you adjust the volume, it will

beep and speak the volume level selected, for example, "Volume 16". It

will play a higher pitched beep at the top and bottom setting and will play

a lower pitched beep at the middle position, where the volume is set to 10.
If you press and hold down either of the volume keys, you will hear a

series of beeps, to indicate that the volume setting is changing, until you

reach the highest or lowest setting. Again the top and bottom settings

have a higher pitched beep and the middle setting has a lower pitched

beep.

When PLEXTALK is playing, each time you adjust the volume, it will beep

but will not speak the volume setting selected. It will play a higher

pitched beep at the top and bottom setting and will play a lower pitched

beep at the position where the volume is set to 10. If you press and hold
down either of the volume keys, you will hear an initial beep but no

further beeps until PLEXTALK reaches the highest or lowest possible

setting. You will, however hear the playback volume increase or decrease

accordingly.

11.4. Changing the guide volume.

The internal speech generated by the PTR2 is called the guide speech. The

volume of the guide speech can be adjusted, either along with the

playback volume or separately. The guide volume can be set on a scale
from 0 to 20, in increments of 1, with 0 being silent and 20 being the

loudest possible setting.

If you wish the guide volume and playback volume to be adjusted

together, use the procedure detailed in the previous section. The guide
volume will increase and decrease as you adjust the playback volume. If

you wish to set the guide volume independently, do the following:

To increase the guide volume, press and hold down the Information key

and then press the Volume Up key repeatedly until you reach the desired
level.

Advertising