Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 118)

119
• If required, connect a set of stereo headphones to the headphone
socket on the left side of PLEXTALK. (See the note below)
• Press the Bookmark key once to turn the recording monitor off.
• Press the Bookmark key again to turn the recording monitor on.
• As you switch the recording monitor on or off, PLEXTALK will
announce which setting is active.
NOTE: In order to avoid acoustic feedback, when recording using the
internal microphone or an external microphone, you will only be able to
control the recording monitor when you are wearing headphones. You
do not require headphones when recording from a line in source.
NOTE: For all recordings, PLEXTALK will automatically turn on the
recording monitor by default.