Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 155)

156
19.4.3. Insert recording.
Insert recording enables you to insert new audio at any point in your
existing recording. All existing audio is preserved and will not be
overwritten or erased.
To use the Insert recording method, do the following:
• Press the Number 1 key until PLEXTALK says "Insert".
• Navigate, in your existing recording, to the location where you
wish to insert the new audio. It is important that you move to the
correct location prior to recording to avoid inserting the new audio
at the wrong place.
• Press the Record key twice to start recording.
• When you have recorded the new audio, press the Play/Stop key to
stop recording.
When you review your recording, you will find that the new audio has
been inserted immediately after the phrase you were on when you started
recording. All the phrases that were after the insertion point, will have
been 'moved over' to make room for the newly inserted audio.
NOTE: PLEXTALK is unable to insert new audio in the middle of an existing
phrase. If you start an insert recording operation in the middle of an
existing phrase, PLEXTALK will insert the new audio immediately after that
phrase.
19.4.4. Punch-in recording.
Punch-in recording allows you to insert new audio at the same time as
specifying a number of existing phrases that are to be erased in the same
operation.
To use the Punch-in recording method, do the following:
• Press the Number 1 key until PLEXTALK says "Punch-in".
• Navigate, in your existing recording, near to the location where
you wish to insert the new audio.