Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 113)

114
Using the audio cable supplied, connect one end to the headphone
socket on the device from which you want to record and the other end to
the line in socket on PLEXTALK.
PLEXTALK will say "Input line in".
CAUTION: When you connect from the line output of a CD player to
PLEXTALK's Line Input socket, the recorded sound may sometimes be
distorted, even if you adjust the recording level. If this happens, you
should connect from the CD player's headphone socket to PLEXTALK's
Line Input socket and then adjust the CD player's headphone output
volume for recording.
NOTE: Whenever a line in cable is connected, it becomes the default input
source automatically.
NOTE: If an external microphone and a line in source are both connected,
the last one connected will become the default input source.
NOTE: Even if more than one input source is connected, you can only use
one input source at a time.
16.7.2. Selecting a specific input source.
In certain situations, you may have more than one input source connected
to PLEXTALK at any one time. As you learned above, PLEXTALK will
default to using the last connected source, however, you may wish to
specify one of the other sources for a particular purpose.
To specify a specific input source, do the following:
• Press the menu key to access the Main Menu.
• Use the Number 4 or 6 key to go to the "Recording settings" option
and select it by pressing the Enter key.
• Use the Number 4 or 6 key to go to the "Select input device" option
and select it by pressing the Enter key.
• Use the Number 4 or 6 key to go to your preferred input source
and select it by pressing the Enter key.
• Your selection will be made and PLEXTALK will exit from the menu
system.