Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 154)

155
19.4.1. Differences in recording and sound quality settings.
In Book Creator mode, the additional recording parameter called “Split
phrase setting when no sound” is added. This enables PLEXTALK to create
a new phrase after a specified time with no audio input. There are 5
available settings to choose from. These range from 0.2 seconds up to 1
second in 0.2 second steps. The default setting for all DAISY recording
modes is 0.4 seconds.
The additional sound Quality setting ”PCM 22.05kHz Mono”, can be used
in Book creator mode. The available recording time with this sound
quality, for a range of different media, is detailed below:
CD-R or CD-RW, Type 74, 650MB: 4 hours
CD-R or CD-RW, Type 80, 700MB: 4.3 hours
CF card, 64MB: 24 minutes
CF card, 256MB: 1.5 hours
CF card, 1GB: 6.5 hours
19.4.2. Switching recording method.
In Normal mode, all new recordings are automatically appended to the
end of the DAISY title. In Book Creator mode, you are able to select
between 2 methods of recording. These are "Insert" and "Punch-in". You
can use the Number 1 Key to switch between these 2 recording methods.
The first time you press the Number 1 key, PLEXTALK will speak the
currently selected recording method. After this, each press of the Number
1 key will switch between "Insert" and "Punch-in" recording.
The last selected recording method will remain the default setting until
you change it again.
NOTE: Both "Insert" and "Punch-in" recording enable you to use a third
recording method called "Overwrite". This method of recording is only
available to you during recording in one of the other 2 methods and
cannot be selected as a recording method on its own.