Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 157)

158
NOTE: The overwrite will replace all audio from the phrase played
onwards, including the phrase itself.
NOTE: Overwrite will not be available if you accidentally press the
Play/Stop key rather than pausing the recording.
19.5. Differences when editing a DAISY title.
This section describes the editing features that are added when you use
Book Creator mode. In this mode you can edit your recording down to
phrase level.
19.5.1. Cutting phrases.
You can delete a single phrase or multiple sequential phrases of audio
from your recording by performing the cut phrase operation. Phrases that
are cut will be placed on the audio clipboard.
To cut a phrase, do the following:
• Press the Menu key once to access the Main Menu.
• Use the Number 4 or 6 key to go to the "Edit" option and select it
by pressing the Enter key.
• Use the Number 4 or 6 key to go to the "Cut phrase" option and
select it by pressing the Enter key.
• PLEXTALK will ask you to select the beginning phrase to cut.
• Use the Number 4 or 6 key to move through the recording by
phrases until the first phrase you want cut is spoken. Select this as
the first phrase to cut by pressing the Enter key.
• PLEXTALK will ask you to select the end phrase to cut.
• Use the Number 4 or 6 key to move through the recording by
phrases until the last phrase you want cut is spoken. Select this as
the last phrase to cut by pressing the Enter key.
• PLEXTALK will then ask you to confirm that you wish to proceed.
Press the Enter key to confirm or the Cancel key to abort.
• If you press the Enter key, PLEXTALK will cut the selected phrases
to the audio clipboard and confirm it by saying "Finished".