Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 128)

129
In recording stand by, press and hold down the Information key.
PLEXTALK will say "Level monitor" followed by the available recording
time on the CD or CF card.
In recording pause mode, press and hold down the Information key .
PLEXTALK will say "Pause" followed by the amount of recorded time in the
current section and the available recording time left on the CD or CF card.
During recording, press and hold down the Information key. PLEXTALK
will say "Recording" followed by the amount of recorded time in the
current section and the available recording time left on the CD or CF card.
NOTE: If voice guidance during recording is set to "Guidance off", you will
not hear any of the above information during recording. You will still hear
the information in the recording stand by and recording pause states.
NOTE: In addition to the information given above, PLEXTALK will
announce the current battery status, the currently selected recording
mode and sound quality setting and the input source.
17.6. Editing heading and page markers during recording.
Having already learned how to make a basic recording, you may now want
to start adding in some of the DAISY navigation features. PLEXTALK
enables you to set and cancel heading and page information either during
or after making the recording. Both methods work well and you will find
that the method you use will depend on the type of recording you are
making.
This section tells you how to set and cancel heading and page markers
during the recording process.
REMINDER: A heading is a marker that is inserted at the start of each
section in the DAISY title. A section in a DAISY title is the piece of audio
between one heading and the next.
Heading and page markers can be set either when recording is paused or
during recording. Both methods are detailed below:
To set a heading during recording, press the Heading key once. PLEXTALK
will say "Heading XX". The new heading will be set immediately.