Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 133)

134
• Use the Number 4 or 6 key to go to the "Edit" option and select it
by pressing the Enter key.
• Use the Number 4 or 6 key to go to the "Save editing information"
option and select it by pressing the Enter key.
• PLEXTALK will ask you to confirm that you wish to proceed. Press
the Enter key to save the editing information or the Cancel key to
abort.
• If you confirm that you wish to proceed, PLEXTALK will save the
information which may take a few seconds. It will then say "Disc"
or "Card", depending on which media you are working with.
Finally it will say "DAISY title" and the title that is being used.
17.8.2. Searching for editing information.
In the unlikely event that PLEXTALK cannot read the CD-R or CD-RW disc
because of a writing error or other problem, you can use the "Search for
edited information in the disc" function to try to roll back your recording
to the condition it was in when the last "Save editing information"
function was carried out.
For example, if you have recorded and edited information in the current
title on 3 separate occasions and have shut down PLEXTALK each time,
there will be 3 sets of information saved about your recording and editing.
The first time you execute the "Search for edited information in the disc"
function, PLEXTALK will try to roll back your recording to the condition it
was in at the end of the second session. This will make it appear that the
whole of the third session has disappeared. If you execute the "Search for
edited information in the disc" function again, the recording will be rolled
back to the condition it was in at the end of the first session, giving the
impression that the second session has disappeared. This can be
continued until there are no further occurrences of saved information on
the disc. At this point PLEXTALK would say "No more edited information
available for search".
Whilst carrying out this process, if you get to a position where you wish to
save your recording, execute the "Save editing information" function or
finalise the CD.