Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 111)

112
16.6. Muting the guide speech when recording.
For best quality recordings, it is recommended that you mute the internal
guide speech when you are recording through the internal microphone or
through an external microphone. This is to avoid the guide speech being
heard in your final recording. You can mute the guide speech in the
following 3 ways:
• Turn down the guide volume to zero - this option works well for
those that can see the recording status light but is more difficult for
blind users who require the guide speech to confirm whether
PLEXTALK is recording or paused.
• Plug in headphones - all output from PLEXTALK is heard through
the headphones and no guide speech is recorded. This method
works well for all users but means having additional hardware
connected.
• Turn off the guide speech during recording - PLEXTALK provides
you with the ability to automatically turn off guide speech when
you start recording. When you are recording, no guide speech is
heard but guide speech returns automatically when you pause or
stop recording.
Guide speech during recording can be turned off or on as follows:
• Press the Menu key once to access the Main Menu.
• Use the Number 4 or 6 key to go to the "Recording settings" option
and select it by pressing the Enter key.
• Use the Number 4 or 6 key to go to the "Switch over the guidance
while recording" option and select it by pressing the Enter key.
• Use the Number 4 or 6 key to select between "Guidance on" or
"Guidance off" and press the Enter key to confirm your selection.
The menu system will be exited automatically.
NOTE: The selection you make will remain the default setting until you
change it again. The factory default is "Guidance on".