Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 41)

42
In order to insert a CF card, do the following:
• You can insert a CF card into the CF card slot with PLEXTALK either
on or off.
• Locate the CF card slot under the CD slot.
• Gently align the CF card with the slot and push it carefully in until it
is fully home. A slightly firmer push will be required at the last part
of this process to ensure that it is properly inserted.
CAUTION: Never be tempted to use excess force as you may cause
damage to the CF card or PLEXTALK.
NOTE: There is a very small ridge on the front edge of compact flash cards.
This ridge should be towards you and facing downwards when the card is
inserted. Micro drives have a rough side and a flat side. The micro drive
must be inserted with the rough side upwards and the flat side towards
you.
NOTE: When the CF card is nearly all the way into the slot, the eject
button for the card will start to come out of the casing, at the right side of
the CF card slot. Ensure that you do not block this area with your fingers.
To eject the CF card, do the following:
REMINDER: The card eject button is located immediately to the right of
the CF card slot.
CAUTION: Before ejecting the CF card, you must ensure that PLEXTALK
has been turned off or that the media selection has been switched to
"Disc". Failure to do so may risk losing data from your card.
CAUTION: If you push the CF Card Eject button while accessing the CF
card, the CF card may be damaged.
• Locate the card ejection button.