Connecting the plextalk to the mains for charging – Activeforever Plextalk PTR2 Digital DAISY Player and Recorder User Manual
Page 35
36
• At one end of the battery you should find a small narrow notch in
one of the edges. At the other end there should be a wider notch
and a small, plastic tab that sticks out slightly.
• Turn the battery so that the notches are facing downwards
towards PLEXTALK and so that the large notch and plastic tab are
pointing to the left.
• Carefully place the battery into the battery slot and slide gently to
the left a little.
• Replace the battery cover by locating the back edge first and then
pressing down on the front edge until the plastic clips snap into
position.
CAUTION: Never use force to try to position the battery or to replace the
battery cover. If the cover will not close, remove it and double check that
the battery is correctly positioned, before trying to fit the cover again.
CAUTION: Do not touch inside of battery slot.
6.5. Connecting the PLEXTALK to the mains for charging.
In order to charge the internal battery, you will need to connect PLEXTALK
to the mains supply as follows: