Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 130)

131
• PLEXTALK will then ask you to adjust the heading position by using
your Number 4 or 6 key.
• Use these keys to move the heading position backwards or
forwards by 0.1 second increments.
• When you are happy that the heading is positioned where you
want it, press the Enter key to finish the process.
• PLEXTALK will confirm that the heading has been set by saying "Set
heading XX" (where "XX" is the number of the heading that has just
been set).
NOTE: Depending on how many titles you have on your CD or CF card,
you will have to press the Heading key twice or three times to get to the
appropriate option.
NOTE: Headings in the recording will be renumbered automatically from
the beginning.
NOTE: The heading marker will be set at the start of the 3 second audio
clip.
17.7.2. Cancelling a heading setting.
If you set a heading in the wrong place, or if a heading was created
automatically where you did not intend it to be, you can easily remove it.
To cancel a heading after completing the recording, do the following:
• Navigate to the location of the heading you wish to cancel.
• During playback or when the playback is stopped, press the
Heading key until PLEXTALK says "Cancel heading XX. Are you
sure" (where "XX" is the number of the heading you are about to
cancel).
• You will then hear the first 3 seconds of audio, from the current
section, played repeatedly.
• If you wish to cancel this heading, press the Enter key.
• PLEXTALK will confirm that the heading has been cancelled by
saying "Cancelled heading XX" (where "XX" is the number of the
heading that has just been cancelled).
NOTE: Remaining headings will be renumbered automatically from the
beginning.