Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 48)

49
To adjust the playback volume, press the Volume Up key or Volume Down
key until the required volume is reached. You can press and hold these
keys down to change the volume quickly.
To adjust the guide speech volume, press and hold down the Information
key and then press the Volume Up or Volume Down keys until the desired
volume is reached.
Adjust the playback speed by flicking the speed control switch towards
the rear of the unit, to increase the speed, and towards the front of the
unit, to decrease the speed. Set the speed to the normal position by
pressing in the speed control switch.
Adjust the playback tone by flicking the tone control switch towards the
rear of the unit to make the tone more treble and towards the front of the
unit to make the tone more bass. Set the tone to the normal position by
pressing in the tone control switch.
Insert a CD by pushing it gently into the CD slot at the front of the unit
until PLEXTALK takes over and pulls the CD fully into the slot. Ensure that
the CD is inserted with the label side upwards. If it is inserted the wrong
way up, PLEXTALK will speak an error message.
Eject the CD by pressing the CD Eject key once.
Insert a CF card by gently pushing it into the CF card slot underneath the
CD slot. PLEXTALK will recognise that it has been inserted and will
automatically access the card contents.
Eject the CF card by pressing the Card Eject button to the right of the CF
card slot. Before ejecting the card, you must ensure that the unit is turned
off or you have switched PLEXTALK to access the disc. If you do not do
this, you may cause damage to the card contents.
Check the current time on the internal clock by pressing and holding
down the Information key. To set the internal date and time, press the