Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 56)

57
unless you first use the prepare to edit command. This command changes
the CD back to the recorder format and allows you to edit the CD. If a CD
has not been finalized, you can go ahead and edit it without using the
Prepare to edit command.
8.5. Finalising a DAISY CD.
Finalisation converts the recorded CD into a disc that can be played on
other DAISY players besides the PLEXTALK recorder, and on a computer
using software. If you do not finalise a CD after recording it, you will not
be able to play it on any other players.
Start the disc finalisation process by going to the "Finalise CD" option in
the "Media Management" menu.
During finalisation, you choose from two options:
• No additional recording and editing: You cannot add recording
after finalization.
• Additional recording and editing enabled: You can record by
performing the Prepare to edit command.
Use the Number 4 or 6 key to go to your preferred option and select it by
pressing the Enter key.
CAUTION: If the battery power fails during operations such as CD backup,
disc finalisation or disc erasing, the media may become damaged or
unusable. It is strongly recommended that you use mains power during
the finalisation process.
NOTE: For Music CDs you cannot add any additional recording.
NOTE: If you are only going to use a CD-R on the PLEXTALK Portable
Recorder, it is not necessary to finalize it. This means you can always add
to the recording later.