Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 83)

84
• When you have entered a valid heading number and pressed the
Enter key, PLEXTALK will switch to the heading you selected and
playback will start automatically. If you have entered an invalid
heading number, the guide speech will speak an error message.
To navigate headings sequentially, using heading levels, do the following:
• Use the Number 2 or 8 key to go to your desired level of navigation,
for example Level 1 or Level 2.
• Press the Number 4 key to move backwards to the previous
heading on the selected level. PLEXTALK will move to the heading
and playback will start automatically. If there is no previous
heading, PLEXTALK will move to the beginning and say "Beginning
of title".
• Press the Number 6 key to move forwards to the next heading on
the selected level. PLEXTALK will move to the heading and
playback will start automatically. If there is no next heading,
PLEXTALK will go to the end and say "End of title".
NOTE: When navigating in this way, PLEXTALK will stop at all headings
that have a level the same as or higher than the level you have selected.
For example, if you chose to navigate on Level 3, PLEXTALK will find all
Level 1, Level 2 and Level 3 headings as you move backwards or forwards.
If you have chosen Level 1 navigation, PLEXTALK will only find Level 1
headings as you move.
12.5. Page navigation.
Navigating to pages is very similar to heading navigation. You can either
go to pages direct or you can move through the available pages one at a
time. When using PLEXTALK, pages are numbered sequentially from the
start of the title.
To go direct to a specified page, do the following:
• Press the Page key until the guide speech says "Go to page".
• Type in the number of the page you wish to go to, using the
Number Pad.
• Press the Enter key to confirm or the Cancel key to clear your entry.