Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 134)

135
If you do not wish to save the recording in any of its rolled back conditions,
simply eject and reinsert the CD and it will be returned to the condition it
was in before you executed any of the "Search for edited information in
the disc" operations.
NOTE: The "Search for edited information in the disc" function is only
effective with DAISY recording on CD-R or CD-RW discs.
To execute the "Search for edited information in the disc" function, do the
following:
• Press the Menu key once to access the Main Menu.
• Use the Number 4 or 6 key to go to the "Media Management"
option and select it by pressing the Enter key.
• Use the Number 4 or 6 key to go to the "Search for edited
information in the disc" option and select it by pressing the Enter
key.
• PLEXTALK will ask you to confirm that you wish to search for
previously edited information. Press the Enter key to confirm or
the Cancel key to abort.
CAUTION: It can sometime take several hours for the "Search for edited
information in the disc" function to execute. For this reason, you are
advised to connect PLEXTALK to a mains supply before proceeding.
NOTE: If the "Search for edited information in the disc" function
successfully recovers editing information, you should immediately
execute the "Save editing information" function, Finalise the CD or backup
the title from disc to CF card.
NOTE: Even if you successfully restore the CD, please do not continue to
use this disc, in case writing errors occur again.
17.8.3. Cutting sections.
In a DAISY title, the "Cut section" function can be used to delete a single
section, or multiple sequential sections of audio, by cutting them to the
audio clipboard. It can also be used, in conjunction with the "Paste
section" function, to move the cut audio to another location in the title.
To cut a section or sections, do the following: