Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 125)

126
• Press the Menu key once to access the Main Menu.
• Use the Number 4 or 6 key to go to the "Recording settings" option
and select it by pressing the Enter key.
• Use the Number 4 or 6 key to go to the "Select recording mode"
option and select it by pressing the Enter key.
• Use the Number 4 or 6 key to go to the mode you want and select
it by pressing the Enter key.
• PLEXTALK will then offer you a chance to select a sound quality
setting from the 6 options listed above.
• Use the Number 4 or 6 key to move through the available options.
As you do this, PLEXTALK will announce the sound quality setting
and also the amount of recording time that this would give you on
the current CD or CF card.
• Once you have chosen the sound quality that you want, select it by
pressing the Enter key. PLEXTALK will confirm that your selection
has been set.
To choose a recording mode and a sound quality setting after going into
recording stand by, do the following:
• Press the Record key once and PLEXTALK will go into recording
stand by.
• Press the Menu key once to access the Main Menu.
• Use the Number 4 or 6 key to go to the "Select recording mode"
option and select it by pressing the Enter key.
• Use the Number 4 or 6 key to go to the mode you want and select
it by pressing the Enter key.
• PLEXTALK will then offer you a chance to select a sound quality
setting from the 6 options listed above.
• Use the Number 4 or 6 key to move through the available options.
As you do this, PLEXTALK will announce the sound quality setting
and also the amount of recording time that this would give you on
the current CD or CF card.
• Once you have chosen the sound quality that you want, select it by
pressing the Enter key. PLEXTALK will confirm that your selection
has been set.
• You will be returned to recording stand by when you have made
your selection.