Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 159)

160
19.5.3. Pasting phrases.
Having cut or copied phrases to the audio clipboard, you can then paste
them back into the current title recording at another location.
To paste phrases that have previously been cut or copied, do the
following:
• Press the Menu key once to access the Main Menu.
• Use the Number 4 or 6 key to go to the "Edit" option and select it
by pressing the Enter key.
• Use the Number 4 or 6 key to go to the "Paste phrase" option and
select it by pressing the Enter key.
• PLEXTALK will now ask you to select the position of the paste.
• Use the Number 4 or 6 key to go to the location where you wish to
paste the audio that is currently on the audio clipboard.
• Press the Enter key when you have made your selection. PLEXTALK
will confirm that the paste has been done by saying "Finished".
NOTE: PLEXTALK will paste the audio immediately in front of the phrase
you specify in the above process.
19.5.4. Splitting phrases.
In Book Creator mode, you can split a phrase into 2 separate phrases. You
may wish to do this if the phrase is too long or if you want to be able to
insert navigation, such as headings or pages, at a point that is part way
through the existing phrase. The splitting position can be adjusted in 0.1
second increments backwards or forwards.
To split a phrase, do the following:
• Press the Menu key once to access the Main Menu.
• Use the Number 4 or 6 key to go to the "Edit" option and select it
by pressing the Enter key.
• Use the Number 4 or 6 key to go to the "Split phrase" option and
select it by pressing the Enter key.
• PLEXTALK will ask you to select the phrase to split.