Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 47)

48
8. Quick start information.
This chapter is designed to give you information about using your
PLEXTALK as a DAISY player and recorder. It outlines how to use
PLEXTALK's functions but does not describe them in detail. The main
sections in this Quick Start section relate to the basic controls, playing a
DAISY title, recording a DAISY title, simple editing of the recording and
finalising the CD.
NOTE: The instructions in this section of the guide relate to use of
PLEXTALK in Normal mode. Some instructions are not accurate for using
PLEXTALK in Book Creator mode.
NOTE: The instructions in this chapter assume that you are sufficiently
familiar with PLEXTALK's layout that you do not require reminders. If you
wish to confirm the details of the physical design of your PLEXTALK, you
should refer to Section 6.3 before reading this chapter.
8.1. Basic control of the unit.
PLEXTALK can be turned on by pushing the power switch towards the rear
of the unit. After a short pause PLEXTALK will announce if it is accessing
the disc or the CF card. If no media is inserted, PLEXTALK will say "No disc".
Turn off the power by pulling the power switch towards the front of the
unit.
When you turn the unit on or off, the power switch returns to the middle
position automatically.
If the Key Lock/Key Describer switch is at the locked position, PLEXTALK
will speak a warning message and will then turn off again. When the
power is ON in the locked position, you can press and hold down any key
to get a brief description of what that key does.
Lock the Key Lock/Key Describer switch by pushing it towards the rear of
the unit. Unlock it by pulling it towards the front of the unit.