Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 214)

215
Appendix C - Trouble shooting.
Symptoms and solutions.
Symptom: You turn on the Power Switch, but the power does not come
on.
Possible cause 1: Loose power cord or AC adaptor.
Solution: Firmly reinsert the mains power cable into the outlet and the AC
adaptor and ensure that the mains plug is firmly inserted.
Possible cause 2: Key Lock is On.
Solution: Turn off the key lock.
Symptom: The power is on, but PLEXTALK does not operate.
Possible cause 1: Battery has not been inserted.
Solution: Insert Battery.
Possible cause 2: Key Lock is On.
Solution: Turn off the key lock.
Symptom: PLEXTALK will not shut down and no keys can be operated.
Possible cause: Unknown error.
Solution: Pulling the Power On/Off switch towards the front for more than
10 seconds. If this does not work, remove the AC Adaptor and Battery
from the unit and then reinsert them.
Symptom: CD cannot be inserted into PLEXTALK.
Possible cause 1: The power is not on.
Solution: Turn the Power Switch on and insert the CD.
Possible cause 2: Another CD has already been inserted.
Solution: Eject the CD and reinsert the one you wish to use.
Symptom: CD cannot be ejected from PLEXTALK.
Possible cause 1: The power is not on.
Solution: Check whether the power is on and cables are securely
connected.
Possible cause: CD is damaged, making it difficult to eject.
Solution: Continue to press the Eject Key.
Symptom: CD will not play.
Possible cause 1: The CD has been inserted upside down.
Solution: Eject the CD and reinsert it with the label side upwards.