Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 140)

141
• If you press the Enter key, PLEXTALK will create a new title, switch
to the new title and confirm it by saying "Finished" followed by the
number of the new title and the total number of titles.
17.11. Erasing a title.
PLEXTALK enables you to delete titles on a CD or CF card. When you erase
a title, you delete the title and all the audio from the title.
To delete a title, do the following:
• Press the Menu key once to access the Main Menu.
• Use the Number 4 or 6 key to go to the "Edit" option and select it
by pressing the Enter key.
• Use the Number 4 or 6 key to go to the "Erase selected title" option
and select it by pressing the Enter key.
• PLEXTALK will then ask you to confirm that you wish to proceed.
Press the Enter key to confirm or the Cancel key to abort.
• If you press the Enter key, PLEXTALK will delete the selected title,
switch to the first title on the CD or CF card and confirm it by
saying "Finished" followed by the number of the title it switched to
and the total number of titles.
NOTE: If you delete the last title on the CD or CF card, PLEXTALK will
behave as if the CD or CF card is blank.
17.12. Finalising a DAISY format CD.
The finalisation process converts a recorded CD into a CD that can be
played on DAISY hardware players, other than the PLEXTALK PTR2, and on
a PC using DAISY playback software. If you do not finalise a CD after
making the recording, you will not be able to play it on any players other
than PLEXTALK. This section shows you how to run the finalisation
process.
During finalisation, you can choose from the following two disc options: