Xylem ProLab 4000 MULTIPARAMETER BENCHTOP METER - Manual (Page 135)

ProLab 4000 Conductivity
135 ba75646d02 01/2010
– Reference temperature – Tref 25
– Tref 20
Reference temperature
– TDS factor setting... 0.40 ... 1.00 TDS factor
This setting only applies to the mea-
sured parameter, TDS.
If a TDS factor is used, it is displayed
in the Status line.
– Alternative TP ( ) ( ) = alternative temperature sensor
is used
– Setting of man. temp... -35 ... +150 °C Entry of the manually determined
temperature. For measurements
without temperature sensor only.
– Reset Cond Resets all sensor settings to the
delivery condition (see page 65).
– Recorder Start recorder (see page 163).
Menu item Setting Description
Measuring