Xylem ProLab 4000 MULTIPARAMETER BENCHTOP METER - Manual (Page 183)

ProLab 4000 Configurations
183 ba75646e02 01/2010
14.1 Viewing a configuration
A configuration viewer is available so the current configuration settings
can be viewed. It gives an overview of the current measurement set-
tings.
1 Open the menu, File / View configuration....
The Configuration window appears.
The current configuration is displayed.
Note
A user whose user rights were restricted by the administrator cannot
change these settings.
2 If required, output the settings to the interface with [Print].
3 Close the Configuration window with [Terminate].