Xylem ProLab 4000 MULTIPARAMETER BENCHTOP METER - Manual (Page 96)

ORP voltage ProLab 4000
96 ba75646e02 01/2010
8.2.4 Measurement settings
The following settings are possible for ORP measurements in the Mea-
suring menu:
Menu item Setting Description
Measuring
– High resolution ( ) Resolution of the mV display:
( ) = 0.1 mV
( ) = 1 mV
– Alternative TP ( ) ( ) = Temperature sensor of
another channel is used
– Setting of man. temp... -35 ... +150 °C Entry of the manually determined
temperature value. For measure-
ments without temperature sensor
only.
– Determine reference... Only if the relative ORP (dU) is
selected as the measured param-
eter
– Recorder... Start recorder (see page 163).