Xylem ProLab 4000 MULTIPARAMETER BENCHTOP METER - Manual (Page 203)

ProLab 4000 Lists
203 ba75646e02 01/2010
Status display indicators
[SC] Measured value (Hold) or
Measurement with stability control
[ARng] Automatic range selection (AutoRange)
[TP] Temperature sensor is being used
CondTP when measuring pH using multiparameter meters on-
ly:
Integrated temperature sensor of a conductivity mea-
suring cell is being used
[nLF] Conductivity measurement only:
Temperature compensation "nLF"
[Lin] Conductivity measurement only:
Temperature compensation "TC lin"
[TC off] Conductivity measurement only:
No temperature compensation "TC off"
[Tref20] Conductivity measurement only:
T
Ref
= 20 °C is selected
as the reference temperature
[Tref25] Conductivity measurement only:
T
Ref
= 25 °C is selected
as the reference temperature
[ISEErr] For calibration with ion sensitive electrodes only:
Electrode voltage outside the calibrated range (see
page 191)