Extron Electronics MAV Plus Series User Guide - Manual (Page 101)

X1@ = Video/audio mute: 0 = no mutes 2 = audio mute
1 = video mute 3 = video and audio mute
X1# = Sync frequency xxx.xx (frequency in Hz [V] or kHz [H])
X1$ = Connection status 0 = no input connected 1 = input connected
X1% = RGB delay interval Delay in 1/2 second increments (10 maximum)
X1^ = Group # (for I/O grouping) 1 through 4 groups (0 = no group)
X1& = Inputs Total number of inputs for this switcher
X1* = Outputs Total number of outputs for this switcher
X1( = Part number 60-nnn-nn
X2) = Firmware version number to second decimal place (x.xx)
X2! = Verbose firmware version-description-upload date/time.
See the Query controller firmware version (verbose) command on page 105 .
X2@ = Voltage Positive or negative voltage and magnitude
X2# = Temperature Degrees Fahrenheit
X2$ = Fan speed RPM
Command and Response Table for SIS Commands
Command Function SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional description
Create Ties
NOTES:
• Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*02&03*03%4*8$.
• The quick multiple tie and tie input to all output commands activate all I/O switches simultaneously.
• The & tie command for RGB and the % tie command for video can be used interchangeably on the matrix switchers.
Tie input video and audio to output X! * X@ ! Out X@ •In X! •All ] Tie the input X! video and audio to
output X@ .
Example: 1*3! Out03•In01•All ] Tie input 1 video and audio to output 3.
Tie input video (RGB) only to output X! * X@ & Out X@ •In X! •RGB ] Audio breakaway.
Example (see last Note bullet,
above): 10*4& Out04•In10•RGB ] Tie input 10 RGB to output 4.
Tie input video only to output X! * X@ % Out X@ •In X! •Vid ] Audio breakaway.
Example (see last Note bullet,
above): 7*5% Out05•In07•Vid ] Tie input 7 video to output 5.
Tie input audio only to output X! * X@ $ Out X@ •In X! •Aud ] Audio breakaway.
Example: 24*4$ Out04•In24•Aud ] Tie input 24 audio to output 4.
Quick multiple tie E +Q X! * X@ !... X! * X@ $ } Qik ]
Example: E +Q3*4!3*5%3*6$ } Qik ] Tie input 3 video and audio to
output 4, tie input 3 video to output 5,
and tie input 3 audio to output 6.
Tie input to all outputs, video and
audio X! *! In X! •All ]
Example: 5*! In05•All ] Tie input 5 video and audio to all outputs.
Clear all ties 0*1 In00•All ]
Tie input to all outputs, RGB (video)
only X! *& In X! •RGB ] Audio breakaway.
Example (see last Note bullet,
above): 8*& In08•RGB ] Tie input 8 RGB to all outputs.
Tie input to all outputs, video only X! *% In X! •Vid ] Audio breakaway.
Example (see last Note bullet,
above): 10*% In10•Vid ] Tie input 10 video to all outputs.
Tie input to all outputs, audio only X! *$ In X! •Aud ] Audio breakaway.
NOTE: X! = Input number (for tie) 00 – 16 or 32 ( 00 = untied)
X@ = Output number 01 – 16 or 32
CrossPoint and MAV Series Matrix Switchers • Programming Guide 95