Extron Electronics MAV Plus Series User Guide - Manual (Page 27)

Video (MAV Plus switchers)
NOTES:
• Video input and output connections are made with female BNC connectors. Some
video input and output devices do not have BNC video output connectors. For
these cases, a suitable cable or connector adapter is necessary.
• The connectors for each video plane are grouped together (for example, for
component/HDTV switchers, all of the Y inputs grouped together, all of the R-Y
inputs grouped, and so on). Ensure that you connect the input on each video plane
to the corresponding connector in the correct group (see figure 16, below and
figure 17 and figure 18 , both on the next page).
The switcher can connect to up to as many as 32 S-video or composite video or up to
16 component/HDTV video, S-video, or composite video sources, depending on the
model. The switcher can output to as many as 32 S-video or composite video or up to 16
component video, S-video, or composite video devices, depending on the model.
a
Video inputs — Connect component/HDTV video (see figure 16), S-video
(see figure 17 ), or composite video (see figure 18 ) inputs, as applicable, to these
BNC connectors for each input.
b
Video outputs — Connect component/HDTV video (see figure 16), S-video
(see figure 17 ), or composite video (see figure 18 ) displays, as applicable, or other
devices to these BNC connectors for each output.
7
Y INPUTS
8
1
2
7
R-Y INPUTS
8
1
2
7
B-Y INPUTS
8
1
2
1
MAV Plus 88, 128
HDA and HD
Composite/HDTV video
MAV Plus 816, 168, 1616
HDA and HD
Component/HDTV video
Figure 16. MAV Plus Component/HDTV Video Connections
CrossPoint and MAV Series Matrix Switchers • Installation 21