Extron Electronics MAV Plus Series User Guide - Manual (Page 68)

4. Mute outputs: One at a time:
a. Press and hold the Output 3 button for approximately 2 seconds until the button
begins to blink.
b. Press and hold the Output 4 button for approximately 2 seconds until the button
begins to blink.
3
4
3
4
The button blinks indicate
that the output is muted.
The button blinks indicate
that the output is muted.
Mute outputs one at a time.
2 seconds
2 seconds
Press and hold the Output 3 button.
Press and hold the Output 4 button.
Green = Video is muted.
Red = Audio is muted.
Amber = Video and audio are muted. (Amber is visible only
after you have selected the Video and Audio buttons).
NOTE: Video is muted in this example.
NOTES:
• If both video and audio are selected, the mute action toggles both the video
and audio outputs. If either the video output or the audio output is already
muted, the unmuted output is muted and the muted output is unmuted.
• If both video and audio are selected and only video is muted, the output
button flashes between green and amber. If only audio is selected, the
output button flashes between red and amber.
5. Mute outputs: One at a time:
a. Press and hold the Output 3 button for approximately 2 seconds until the button
returns to its previous state. The output 3 video and audio signals are unmuted.
b. Press and hold the Output 4 button for approximately 2 seconds until the button
returns to its previous state. The output 4 video and audio signals are unmuted.
3
4
3
4
Unmute outputs one at a time.
2 seconds
2 seconds
Press and hold the Output 3 button.
Press and hold the Output 4 button.
The button returns to its previous indication
(either lit, background illuminated, or unlit)
to indicate that the output is unmuted.
The button returns to its previous indication
(either lit, background illuminated, or unlit)
to indicate that the output is unmuted.
NOTE: If both video and audio are selected, the unmute action toggles both
the video and audio outputs. If either the video output or the audio output is
already unmuted, the muted output is unmuted and the unmuted output is
muted.
6. Exit View-only mode: Press and release the View button.
All input buttons and output buttons
return to unlit or background illumination.
VIEW
Press the View button
to exit View-Only mode.
The View button returns to
unlit or background
illumination.
CrossPoint and MAV Series Matrix Switchers • Operation 62